Commercial Epoxy Flooring Contractors

Heavy-duty industrial-grade systems for warehouses, retail, and high-traffic spaces.

Typical cost: $4 to $12 per square foot installed

Commercial epoxy flooring covers everything from a retail back-of-house to a 50,000 square foot warehouse, and the right system depends entirely on what the floor has to survive. A salon needs a thin decorative coating. A manufacturing floor needs a heavy-build chemical-resistant system. A commercial kitchen needs a high-friction, anti-slip, sanitary system that meets health-code expectations. Matching the system to the environment is the difference between a floor that holds up under daily commercial use and one that needs replacement well before its warranty period ends.

When to choose this service

Choose commercial epoxy flooring when the floor has to survive forklift traffic, chemical spills, sanitary requirements, or heavy daily commercial use. If you are coating a residential garage instead, garage floor epoxy is the right product fit and runs at a lower cost. If you are scoping a small light-commercial or back-of-house space and want a budget-friendly protective coating rather than a heavy-build system, epoxy floor coating is the lighter alternative.

What commercial epoxy flooring actually is

A commercial epoxy installation matches the system to the use case. Common builds include thin-mill protective coatings (15 to 20 mils) for offices and retail; medium-build flake or quartz floors (40 to 80 mils) for kitchens and salons; heavy-build self-leveling epoxy (125 mils or more) for industrial and manufacturing; urethane cement overlays for hot-process commercial kitchens. All start with diamond-ground concrete and a moisture-tested slab.

Industries commonly served

Warehouses and distribution centers handling forklift traffic and pallet wear
Manufacturing floors with chemical, oil, and abrasion exposure
Restaurant kitchens, breweries, and food-processing spaces with sanitation requirements
Retail, showroom, and gym floors that need a clean look with high traffic tolerance
Auto and service shops where chemical spills are routine

Typical cost

$4 to $12 per square foot installed

Pricing depends heavily on system thickness, slope, drains, line striping, and whether the work happens during normal operations. Thin-mill protective coatings run $4 to $7. Medium-build commercial floors run $6 to $10. Heavy-build industrial systems run $8 to $12 or higher. Most contractors will quote phased work to keep your floor in service.

Installation timeline

Most commercial projects are scheduled in 2 to 7 day windows depending on size and system. Many contractors offer overnight or weekend installation to avoid downtime, with fast-cure resin systems that handle foot traffic in hours and forklift traffic in 24 to 48 hours.

Choosing the right commercial system

Most commercial epoxy quote discussions go better when you walk in with a system class already in mind. Use this matrix as a starting point, then let the contractor confirm or adjust based on a site visit and a moisture test.

Thin-mill protective 15 to 20 mils

Offices, light retail, back-of-house spaces, and showrooms where appearance and dust control matter more than impact resistance. Lowest-cost commercial option.

Medium-build flake or quartz 40 to 80 mils

Commercial kitchens, salons, gyms, breweries, light manufacturing, and veterinary clinics. Adds slip resistance, sanitation, and a longer-wearing surface.

Heavy-build self-leveling 125 mils or more

Warehouses, distribution centers, manufacturing floors, and auto bays. Handles forklift wheel loads, chemical spills, and heavy impact over a multi-year service life.

Urethane cement overlay 250 mils or more

Hot-process kitchens, food and beverage plants, and any floor that takes thermal shock, steam cleaning, or aggressive sanitation chemistry. One of the heaviest-build options used in commercial work.

Scoping a commercial floor? When you request quotes, share your square footage, the use case, and your operating-hours constraints so contractors can quote system options that fit the environment instead of defaulting to a residential build.

Operating environment and scheduling

Most commercial floors cannot shut down for a full week, and a good contractor builds the schedule around your operating hours. Phased work, overnight installation, and weekend windows are common in the commercial space. Before signing a quote, confirm the work plan around: temperature and humidity inside the building during install, ventilation for solvent-based systems, isolation between coated and active zones, joint and drain detailing where the new system meets existing concrete, and how line striping or safety markings will be reinstated.

Maintenance and service life

Service life varies by system, traffic, and operating environment, but a well-specified and properly installed commercial epoxy floor can run for many years before a full recoat is needed. Routine cleaning makes up the majority of the maintenance budget. Daily care is typically auto-scrubbing or microfiber mopping with a neutral pH cleaner; solvent-based degreasers can dull flake topcoats over time. Inspect joints and traffic lanes regularly for chips, since spot repairs are usually less expensive than addressing the moisture intrusion that can lift a coating from the slab. In heavy-traffic zones, a topcoat refresh can extend surface life without redoing the full system.

Questions to ask before hiring

Have you installed this specific system in a comparable commercial environment? Ask for addresses.
How will you handle moisture testing, joint repair, and drain detailing?
What is the slip-resistance rating after install, and is it documented?
Can you phase the work to keep our business operating?
What is the warranty period, and what is covered versus excluded?

Texas cities with active contractors

Texas is our most complete market. These cities have the deepest contractor coverage for commercial epoxy flooring today, or you can browse the full Texas directory for every market we cover.